Allied Telesis AT-LX3800U - Manual (Page 44)

Chapter 2: Installation
44
Unpacking the Chassis
To unpack the chassis, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Make sure that the following components are included in the package.
If any item is missing or damaged, contact your Allied Telesyn sales
representative for assistance.
ˆ One AT-LX3800U chassis with preinstalled Ac or DC power
supply
ˆ Two rack-mount brackets
ˆ Eight flathead Phillips rack-mount bracket screws
ˆ Power cord (AC models only; Americas, EU, Australia, and
UK only)
ˆ AC power cord retaining clip (AC models only)
ˆ Management cable with DIN-8 connector for local
management connection
ˆ Documentation CD
ˆ Warranty card
3. Place the AT-LX3800U chassis on a level, secure surface.