Allied Telesis AT-LX3800U - Manual (Page 29)

AT-LX3800U Multi-Service Transport System Installation and Maintenance Guide
29
Management Connections
The AT-LX3800U chassis provides two management connections to the
preinstalled AT-S65 management software:
ˆ RS-232 terminal port for local (out-of-band) management
ˆ 10/100Base-TX Ethernet port for remote management using Telnet
Terminal Port You can use the terminal port to establish a local (out-of-band)
management session with the chassis to configure parameters and also
view information about the operating of the system and line cards. You
establish a local management session with the switch by connecting either
a terminal, or a personal computer with a terminal emulation program, to
the port.
The terminal port has a DIN-8 style connector. A management cable is
supplied with the chassis.
The terminal port is set to the following specifications:
ˆ Baud rate: 115200 bps
ˆ Data bits: 8
ˆ Parity: None
ˆ Stop bits: 1
You can use the AT-S65 management software to change the terminal
port settings.
10/100Base-TX
Ethernet Port
You can also manage the AT-LX3800U chassis from any workstation on
your network through the 10/100Base-TX Ethernet port using Telnet.