Allied Telesis 9400 iMAP - Manual (Page 33)

Data Management Cable (MGMT Port on Control Module) Apply Power and Check Startup Sequence
1-29
Telesyn x400 - Installation Guide (Installation of ATI 9400)
Target : cfc6
Options :
----------------------------------------------
Boot ROM Version Information
----------------------------------------------
Boot ROM : Telesyn 6G Central Fabric Controller Boot Loader
Revision : 3.0.g.01
Built on : Thu 03/11/2004 at 9:07a
Built by : mbuilder
Environment: mbuilder_R3.0_integration
Baseline : Integration Latest
BuildTarget: bootcfc6
----------------------------------------------
VxWorks Version 5.5 for IBM PowerPC 405GP Rev E
BSP version 1.2/2
Copyright Wind River Systems, Inc., 1984-2002
Memory Size: 127 MB
WDB Comm Type: WDB_COMM_END, State: Ready
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
********************
* WARNING: Debug IP mode is currently enabled.
********************
* WARNING: Standard Telesyn boot procedure has been disabled.
********************
System Time is 2004-07-16 09:28:45.188
System initializing...
/tffs/ - Volume is OK
Initialization completed successfully
User Access Verification
Username:
4. The system will run initialization tests and end with the prompt Username :