Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 65)

Property Name Description Valid Values
• DEC MOP REM CONS
• DEC DECNET
• DEC LAT
• DEC DIAGNOSTIC
• DEC CUSTOMER
• DEC LAVC
• RARP
• DEC LANBRIDGE
• DEC ENCRYPTION
• APPLETALK
• IBM SNA
• IPX ETHII
• APPLETALK AARP
• SNMP
• IPV6 ETHII
• IPX 802.3
• ETHERTALK 2
• ETHERTALK 2 AARP
• IPX SNAP
• any
This can also be set by entering
a 1- to 5-byte hexadecimal
value (00-FFFFFFFFFF).
IP DSCP Specifies the Code Point bits of
the DiffServ field of an IP
packet.
This can be set by entering one
or more integers from 0-63.
Input can be a comma
separated list or a range
(specified as m-n) or a
combination of both. (e.g. 2, 4-
7)
This value can also be set to
"any".
IP Type of
Service Specifies the value of the
precedence field within the
TOS (Type of Service) byte of
an IP packet. Range: any, 0-7
IP Protocol Specifies a Layer 4 IP protocol
of an IP packet. For IPv6
packets, this parameter
matches against the Next
Header field of the IPv6 packet
header.
This can be set by selecting any
of the following values:
• TCP
• UDP
• ICMP
• IGMP
• OSPF
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 65 of 128