Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 103)

Column Name Description Valid Values
bandwidth with other
queues in the WRR2
group according to their
relative values of
wwrweight. The WRR2
group can transmit
frames when both the
strict and WRR1
scheduling groups are
empty. The initial value
is strict.
WRR Weight Specifies the weight to use for
the queue when it is configured
to use one of the WRR groups.
This value can be set by
entering a number from 6-255.
Note - If the Scheduler is set to
"Strict", then the application
will ignore the value for this
field.
Length Specifies the length to set for
the specified egress queue,
measured in frames. This value can be set by
entering a number from
16~3648.
Note - The maximum length is
still dependent on the port
type:
• 10/100 Mbytes max
length is 128
• 1 Gigabit max length is
896
• 10 Gigabit max length is
3648
6.7.7 Quick Setup
Property Name Description Valid Values
Source UDP
Port Specifies the UDP source port
of an UDP/IP packet. Range: 0-65535 or a port range
(n-m).
Default for VOICE: 1719
Default for VIDEO: 1024
Priority Specifies the priority that will
be assigned for this setup. Range: 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum Specifies the maximum • 0-16000000 kbps
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 103 of 128