Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 61)

6.5.7 Quick Setup
Property Name Description Valid Values
Source UDP
Port
Specifies the UDP source port
of a UDP/IP packet.
Range: 0-65535
Default for VOICE: 1719
Default for VIDEO: 1024
Priority Specifies the priority that will
be assigned for this setup.
Range: none, 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum
Bandwidth Specifies the maximum
bandwidth available to this
setup.
• 0-16000000 kbps
• 0-16000 Mbps (decimal
point supported)
• 0-16 Gbps (decimal point
supported)
Default for VOICE: 128kbps
Default for VIDEO: 256kbps
Port
Assignment Specifies a list of ports that will
be affected by this setup. Select from a list of available
Ports.
Default for VOICE: no ports
Default for VIDEO: no ports
6.5.8 Notes
• Although Flow Group ID, Traffic Class ID and Policy ID can range from 0
to more than 64, the current firmware version only allows up to a
maximum of 64 instances to be created for Flow Group, Traffic Class and
Policy.
• Ports cannot be assigned to a Policy unless the Policy is connected to a
Classifier through Flow Groups and Traffic Classes.
• The Description property of Flow Group, Traffic Class and Policy accepts
up to 31 characters when configured through the CLI and up to 15
characters when configured through QoS Manager. As such, setting a
QoS element's Description property to more than 15 characters using
the CLI will result in an error message when an attempt is made to
modify that QoS element through QoS Manager.
6 Device Support
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 61 of 128