Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 117)

Column Name Description Valid Values
Max Packets
Maximum number of packets
able to be transmitted from
this queue before the control is
passed to the next queue.
Range: 0-255
Max Latency
Maximum permissible elapsed
time between packets
transmitted from this queue.
Range: 0, 16-4080
6.8.7 Quick Setup
Property Name Description Valid Values
Source UDP
Port
Specifies the UDP source port
of an UDP/IP packet.
Range: 0-65535 or a port range
(n-m).
Default for VOICE: 1719
Default for VIDEO: 1024
Priority Specifies the priority that will
be assigned for this setup.
Range: none, 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum
Bandwidth
Specifies the maximum
bandwidth available to this
setup.
• 0-16000000 kbps
• 0-16000 Mbps (decimal
point supported)
• 0-16 Gbps (decimal point
supported)
Default for VOICE: 128kbps
Default for VIDEO: 256kbps
Port
Assignment Specifies a list of ports that will
be affected by this setup. Select from a list of available
Ports.
Default for VOICE: no ports
Default for VIDEO: no ports
6.8.8 Notes
• The current firmware version does not allow the Ingress Interface
classifier property to be set to 'none'.
• The current firmware version only allows values in the range [0-255]
inclusive for the ICMP Type and ICMP Code classifier properties.
• Values entered for the Max Bandwidth traffic class property are rounded
to the nearest 1000kbps.
• Valid values for the PPP Index classifier property are in the range [0-1024]
inclusive for the CLI and [0-1023] inclusive for QoS Manager. As such,
setting a classifier's PPP Index property to 1024 using the CLI will result
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 117 of 128