Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 113)

Property Name Description Valid Values
to be checked.
Match2 Specifies the actual data to
match
This can be set by entering a 4-
byte hex number. (0000-FFFF)
Mask2 Specifies whether the
corresponding bit in the
Match2 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 4-
byte hex number. (0000-FFFF)
Offset2 Specifies the location or offset
where the pattern for Match2 is
to be checked.
Range: 0-62
Match3 Specifies the actual data to
match
This can be set by entering a 4-
byte hex number. (0000-FFFF)
Mask3 Specifies whether the
corresponding bit in the
Match3 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 4-
byte hex number. (0000-FFFF)
Offset3 Specifies the location or offset
where the pattern for Match3 is
to be checked.
Range: 0-62
6.8.2 Flow Groups
6.8.2.1 QoS Information Window
Column Name Description
Flow Group ID Lists the ID of Flow Groups available
Description A brief description of the Flow Group.
Classifiers List of Classifiers associated with this Flow
Group
6.8.2.1 Add/Modify Flow Group
Property Name Description Valid Values
Flow Group ID
(cannot be
modified)
Specifies the unique identifier
for the Flow Group. Range: 0-1023
Description Specifies a brief description of
the Flow Group. To set this value, enter an
alphanumeric string from 1-15
characters.
Mark Value This parameter specifies a
replacement value to write into
the DSCP (TOS) field for all
packets.
Range: none, 0-63
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 113 of 128