Allied Telesis AT-IX5-28GPX - Manual (Page 69)

IX5-28GPX Installation Guide
69
5. While another person holds the switch in the equipment rack, secure it
using standard equipment rack screws (not provided), as shown in
Figure 26 for horizontal mounting and Figure 27 for vertical mounting.
Figure 26. Mounting the Switch Horizontally in an Equipment Rack
Figure 27. Mounting the Switch Vertically in an Equipment Rack
6. If required, repeat this procedure to install the remaining switches in
the stack.
7. Apply power to the switch or switches, as described in the following
procedures.
S2/2 8
S1/2 7
26
25
CONSO LE
IX5-28GPX
FDX HDX COL
1000 LI NK AC T 10/1 00 L INK AC T
SFP +
2674
S2/28 S1/27
26 25
CONSOLE
IX5-28GPX
FDX
HDX COL
1000 LINK
AC T
10/100 LINK
AC T
SFP+