Allied Telesis AT-IX5-28GPX - Manual (Page 16)

Chapter 1: Overview
16
Features
Here are the features of the AT-IX5-28GPX switch:
10/100/1000
Mbps Twisted
Pair Ports
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:
ˆ 24 ports per switch
ˆ 10Base-T, 100Base-TX, and 1000Base-T compliant
ˆ IEEE 802.3u Auto-Negotiation compliant
ˆ Auto-MDI/MDIX
ˆ 100 meters (328 feet) maximum operating distance
ˆ IEEE 802.3x flow control in 10/100Base-TX full-duplex mode
ˆ IEEE 802.3x backpressure in 10/100Base-TX half-duplex mode
ˆ IEEE 803.3z 1000Base-T flow control
ˆ Jumbo frames up to 13KB
ˆ RJ-45 connectors
Power Over
Ethernet
Here are the basic features of Power over Ethernet (PoE) on the twisted
pair ports:
ˆ Supported on ports 1 to 24
ˆ Supports PoE (15.4 watts maximum) and PoE+ (30 watts
maximum) powered devices
ˆ Supports powered device classes 0 to 4
ˆ Maximum power budget of 720 watts
ˆ Port prioritization
ˆ Mode A wiring
SFP+ Slots
Here are the basic features of the four SFP+ slots on the switches:
ˆ Supports 10Gbps, 10GBase-SR/LR fiber optic transceivers
ˆ Supports 10Gbps AT-SP10TW direct connect twinax cables with
SFP+ transceiver-style connectors
ˆ Supports 1000Base-SX/LX SFP transceivers
ˆ Supports single-port BiDi 1000Base-LX SFP transceivers
ˆ Supports 1000Base-ZX SFP transceivers
Note
The SFP+ slots do not support 100Mbps 100Base-FX transceivers.