Samsung SGH-A637CWAATT User Manual
Page 133
WAP Browser and MEdia Net 130
this choice be made with the assistance of either the retailer or
customer service representative.
1.
When the Idle screen displays, press the Menu soft key,
then select MEdia Net
➔
Browser Settings.
2.
Use the Up or Down Navigation key to highlight one of
these connection profiles:
• MEdia Net
• AT&T MMS
• AT&T IMS
3.
Press the Options soft key.
Caution!: The WAPs are pre-configured and can not be altered using this
screen. The MMS connection option can be edited, renamed, or
deleted using this screen. Your phone is set up by default for
connecting to the network.
If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not
work properly.
4.
To create a new connection profile, press the Options soft
key and select New.
- or -
To edit an existing profile, highlight the profile, press the
Options soft key, and select Edit.
5.
Select each parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
WAP or HTTP.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Gateway address: (WAP only) enter the gateway address of the
proxy server.
• Proxy address: (HTTP only) set the proxy server address and port.
• Linger Time (Sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
• Advanced Settings: allows you to configure some of the IP-
specific information: Static IP, Static DNS, Server information, and
Traffic Class.
–
Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.