Editing a contacts entry, Editing contacts name and numbers, Add pauses to contacts numbers – Samsung SCH-U520ZNAUSC User Manual

Page 56

Editing a Contacts Entry

Editing Contacts Name and Numbers

Find the Contacts entry you wish to change. See “Finding a Contacts Entry“

on page 53 for more information.

Use the navigation keys to highlight the entry and press the

key.

Use the navigation keys to review the information for the entry that you

wish to change, then press the EDIT key (

Use the navigation keys to highlight the particular information you want to

add or change.

• Press

to backspace and delete numbers or letters.

• Press and hold

to clear all numbers or letters in the highlighted field.

• Press the Options (right) soft key (

). The following options popup in the

display:

–

Set Speed Dial — Assign a speed dial number (see “Speed Dial“ on page 60

for more information).

–

Set As Default — Set the number the phone will dial when Contracts dialing,

speed dialing, or voice dialing.

–

Wait — A hard pause (waits for input from you).

–

2-Sec Pause — A 2-second pause after which dialing resumes (see “Add

Pauses to Contacts Numbers“ on page 56 for more information).

Use the navigation keys to highlight the desired option, then press the

key.

When you’re finished changing the contents of a field, press the

key.

Your changes are saved and a confirmation message appears in the
display.

Add Pauses to Contacts Numbers

Calls to automated systems such as banking services often require a password or
account number. Instead of manually entering these numbers, you can store them in
a Contacts entry with the phone number and with special characters called pauses,
up to a maximum of 32 digits.

•

Wait — Stops the calling sequence until the phone receives further input.

•

2-Sec Pause — Stops the calling sequence for two seconds, then sends the

remaining digits.

Tip: You can enter multiple 2-Sec Pauses to extend the length of a pause. For example, two consecutive

2-Sec Pauses cause a total pause time of four seconds. Keep in mind that pauses count as digits
towards the 32-digit maximum.

CLR