Alerts, Key tone, Alerts key tone – Samsung SCH-U520ZNAUSC User Manual
Page 119
Sounds 119
5.
Press the
key to save the desired ringtone or sound as the selected
Ringer Type.
Alerts
You can set your phone to sound an alert whenever you enter or leave your service
area, connect or disconnect a call, and other options.
1.
In standby mode, press the MENU key (
), then press
(for Sounds)
and
for
Alerts
.
The following options appear in the display:
• Minute Beep — Sound an alert ten seconds before each elapsed minute of a
call.
• Roaming — Sound an alert when you leave your home service area while on a
call.
• Call Connect — Sound an alert when you connect a call.
• Power On/Off — Sound an alert when you turn your phone one or off.
2.
Use the navigation keys to highlight a sub menu, then press the
key.
The following available settings appear in the display:
• On
• Off
3.
Use the Up and Down navigation keys to change the setting for the
selected alert.
4.
Press the
key to save the new setting. Press
to retain the current
setting.
Key Tone
Key Tone allows you to adjust the volume level and length of the tone that the
keypad generates each time you press a key.
1.
In standby mode, press the MENU key (
), then press
(for Sounds)
and
for
Key Tone. The following options appear in the display:
• Tone Level
• Tone Length
Tone Level is highlighted.
2.
Press the
key to adjust the Key Tone level (volume).
• Use the volume keys or navigation keys to set the tone level for keypad tones.
• Press the
key when the desired tone level setting is reached to save your
setting. You are returned to the Key Tone sub menu.
3.
Use the navigation keys to highlight Tone Length, then press the
key.
• Use the navigation keys to highlight Short or Long.
• Press the
key to save your setting. You are returned to the Key Tone sub
menu.
OK
OK
OK
OK
CLR
OK
OK
OK
OK
OK