ADC HDSL4 - Manual (Page 48)

Monitoring System Activity and Performance LTPH-UM-1031-03, Issue 3
40 September 12, 2003 H4TU-C-319 List 1
U
SING THE
R
EPORT
M
ENU
The Report menu ( Figure 26 ) provides screens containing status and performance monitoring data for line and
remote units which can be downloaded to a file for analysis or future reference. Table 14 on page 41 describes the
four types of reports provided by the Report menu.
To select each individual report, do the following:
1 Press to select Report menu.
2 Press the to select a report type and print mode.
— Continuous Print Mode generates a non-stop version of the report.
— Page Mode generates a page-by-page version of the report for easy viewing on the screen.
3 Use your terminal emulation software (HyperTerminal or Procomm) to capture the selected report to your
printer. Press
to generate. (If Page Mode is selected, press the to continue or to quit.)
4 End the captured report.
5 Press + to refresh the Report menu screen.
Figure 26. Report Menu - Full Report
O
SPACEBAR
ENTER SPACEBAR ESC
CTRL R
Monitor Performance Event Log Config Inventory Report Rlogon Help
Report Type : Full Report
Print Mode : Continuous
Please select report type and print mode by pressing , then start
terminal logging and press to generate the report.
ID: xxxx—-xxxx—-xxxx--xxxx 02/01/2002 12:30:01 H4TU-C System: OK _