ADC HDSL4 - Manual (Page 31)

LTPH-UM-1031-03, Issue 3 Provisioning
H4TU-C-319 List 1 September 12, 2003 23
Resetting to Factory Defaults
To reset the H4TU-C-319 to its original factory defaults:
1 Press to select the Config menu.
2 Use the and arrow keys to select Set Factory Defaults, then press .
3 Press if you are certain you want to reset the H4TU-C, or press to cancel this action.
Figure 9. Config Menu - Set Factory Defaults
Changing these Power Back Off option settings on a live circuit causes the HDSL4 loop to
momentarily drop and then reacquire synchronization. This setting can also affect the operating
margins.
Resetting the H4TU-C to its original factory settings may cause interruption of service.
C
↑ ↓ ENTER
Y N
Monitor Performance Event Log Config Inventory Report Rlogon Help
+----------------------+
| Standard Options -> |
| ADC Options -> |
| BERT Generator -> |
| Date and Time -> |
| Master Clear |
|
Set Factory Defaults |
+----------------------+
SETTING FACTORY DEFAULTS...SERVICE MAY BE INTERRUPTED! ARE YOU SURE (Y/N)?
ID: xxxx--xxxx—-xxxx--xxxx 02/01/2002 12:30:01 H4TU-C System: OK ___