ADC HDSL4 - Manual (Page 21)

LTPH-UM-1031-03, Issue 3 Provisioning
H4TU-C-319 List 1 September 12, 2003 13
Figure 3. Logon Screen
Most VT100 emulation programs support a print screen option. For Windows-based programs,
such as Procomm or HyperTerminal, refer to the Help menu for instructions.
Table 4. Logon Screen Menus
Press this key: To access this menu: Menu Functions
Monitor Monitors loopbacks and alarms, and provides a graphical representation
of circuit activity, including ES, UAS, SES, and line code.
Performance Provides performance and alarm histories for current, 25-hour, 48-hour,
or 31-day periods for either the DS1 or HDSL4 interface.
Event Log Identifies the 100 most recent system events and reports the date and
time of occurrence.
Config Provides standard configuration options, ADC options, BER tester
(BERT), date and time setting, and a reset option (factory settings). Also
provides a master clear option that clears all performance, alarm, and
event log entries. Selecting the Config menu after a remote logon displays
the BERT Generator menu, which provides access to the BERT Signal
Generator configuration submenu.
Inventory Provides product information about the various devices that are in the
system and lists circuit and device identifications.
Report Provides four types of reports: Full Report, Short Report, System
Information Report, and Event Report.
Continued
Circuit ID Date and Time Logon Device System Status
Menu bar
Monitor Performance Event Log Config Inventory Report Rlogon Help
+------------------------------------------+
| |
| ADC DSL Systems, Inc. |
| HDSL4 |
| |
| Voice: 800.638.0031 |
| Fax : 714.730.2400 |
+------------------------------------------+
ID: xxxx--xxxx--xxxx—-xxxx 02/01/2002 12:30:01 H4TU-C System: OK ___
M
P
E
C
I
O