Samsung SCH-R630LBAUSC - Manual (Page 39)

Understanding Your Contacts 36
Select the desired option. The selected option’s sub-menu
appears in the display.
Editing a Contacts Entry
Editing Contacts Name and Numbers
1. Find the Contacts entry you wish to change. See “Finding a
Contacts Entry” on page 34 for more information.
2. Tap the desired Contact. The selected Contact’s
information appears in the display.
3. Scroll up or down to review the information for the Contact
that you wish to change, then tap Edit. The Edit Contact
screen appears in the display.
4. Open the QWERTY keypad and tap the particular
information you want to add or change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the highlighted
field.
• Tap . The following options popup in the display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial
number (see “Speed Dial” on page 39 for more information).
– 2-Sec Pause — A 2-second pause after which dialing resumes (see
“Add Pauses to Contacts Numbers” on page 36 for more
information).
– Wait — A hard pause (waits for input from you).
Select the desired option.
5. When you’re finished changing the contents of a field,
press Save. Your changes are saved and a confirmation
message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• 2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
• Wait — Stops the calling sequence until the phone receives further
input.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. See “Finding a
Contacts Entry” on page 34 for more information.
2. Select and edit the desired number. See “Editing a
Contacts Entry” on page 36 for more information.