Horner APG SmartStix HE559MIX977 - Manual (Page 7)

MAN0561-02 27 FEB 2007 Page 7
All information subject to change without notice.
7
SETTING ID SWITCHES
CsCAN Network IDs are set using the hexadecimal number system from 01 to FD. The decimal
equivalent is 1-253. Refer to following Conversion Table, which shows the decimal equivalent of
hexadecimal numbers. Set a unique Network ID by inserting a small Phillips screwdriver into the two
identical switches.
Note: The CsCAN Baud Rate for SmartStix I/O is fixed at 125KBaud
Close-up of Switches
LO (x1) HI (x16) MS NS PWR
SmartStix I/O
Use this switch to set
the Low Digit – has an
x1 multiplier. Use this switch to set the
High Digit –has an x16
multiplier.
Power and Diagnostic
LEDs