Vaisala WXT510 - Manual (Page 65)

Chapter 7 __________________________________________________ Getting the Data Messages
VAISALA _______________________________________________________________________ 63
Example of the response:
0R1,Dm=027D,Sm=0.1M
0R2,Ta=74.6F,Ua=14.7P,Pa=1012.9H
0R3,Rc=0.10M,Rd=2380s,Ri=0.0M,Hc=0.0M,Hd=0s,
Hi=0.0M
0R5,Th=76.1F,Vh=11.5N,Vs=11.5V,Vr=3.510V
Composite Data Message Query
(aR0)
This command is used to request a combined data message with user
configurable set of wind, pressure, temperature, humidity, precipitation
and supervisor data.
Command format: aR0
Example of the response (the parameters included can be chosen
from the full parameter set of the commands aR1, aR2, aR3 and
aR5):
0R0,Dx=005D,Sx=2.8M,Ta=23.0C,Ua=30.0P,Pa=1028.2H,
Hd=0.00M,Rd=10s,Th=23.6C
For selecting the parameter set in the response message, see Chapter 8,
Sensor and Data Message Settings, on page 93 .
where
a
= Device address (default = 0)
R = Combined message query command
= Command terminator
where
a
= Device address
R0 = Composite data message query command
= Command terminator