Vaisala WXT510 - Manual (Page 100)

User’s Guide ______________________________________________________________________
98 __________________________________________________________________ M210470EN-D
Changing the wind parameter selection:
0WU,R=0100100001001000
0WU,R=01001000&00100100
The response after the change:
0R1
0R1,Dm=268D,Sm=1.8N
Example (SDI-12, device address 0):
Changing the measurement interval to 10 seconds:
0XWU,I=10!0
In SDI-12 mode a separate enquiry (0XWU!) must be given to check the
data content.
NOTE Character '&' is not allowed in the command.