Vaisala WXT510 - Manual (Page 61)

Chapter 7 __________________________________________________ Getting the Data Messages
VAISALA _______________________________________________________________________ 59
The response:
a
Example:
0
0
Wind Data Message (aR1)
With this command you can request the wind data message.
Command format: aR1
Example of the response (the parameter set is configurable):
0R1,Dn=236D,Dm=283D,Dx=031D,Sn=0.0M,Sm=1.0M,
Sx=2.2M
where
a
= Device address
= Response terminator
where
a
= Device address
R1 = Wind message query command
= Command terminator
where
a
= Device address
R1 = Wind message query command
Dn = Wind direction minimum (D = degrees)
Dm = Wind direction average (D = degrees)
Dx = Wind direction maximum (D = degrees)
Sn = Wind speed minimum (M = m/s)
Sm = Wind speed average (M = m/s)