Mounting to horizontal cross arm – Vaisala WXT510 User Manual
Page 33
Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 31
Mounting To Horizontal Cross Arm
1.
Remove the screw cover.
2.
Align the horizontal cross arm in south-north-direction, see
Aligning WXT510 on page 32
.In case the cross arm cannot be
aligned, make the wind direction correction as instructed in section
Wind Direction Correction on page 34
.
3.
Mount the transmitter into the cross arm by using the fixing screw
(M6 DIN933) and a nut, see
Figure 9 on page 30
and
Figure 10 on
page 31
.
0505-199
Figure 10
Mounting WXT510 to Cross Arm (L-Profile)
The following numbers refer to
Figure 10 on page 31
:
1
=
Nut
2
=
Fixing screw (M6 DIN933)