I2c interface, Vaisala industrial protocol, Mi70 hand-held indicator – Vaisala GMP231 User Manual
Page 78: C interface
User's Guide _______________________________________________________________________
76 ___________________________________________________________________ M211501EN-C
I
2
C Interface
I
2
C interface supports one and two-point adjustment sequences as well as
configuration of the environmental compensation settings using the
Get_Parameter and Set_Parameter commands. See the following
sections:
Vaisala Industrial Protocol
Vaisala industrial protocol supports one and two-point adjustment with
the CCO2 command. You can also adjust the internal pressure and
temperature measurements with a simple offset correction. Configuration
of the environmental compensation settings can be done using serial line
commands. See the following sections:
- Calibration Commands on page 41
- Changing Measurement Settings on page 35
MI70 Hand-Held Indicator
MI70 hand-held indicator supports one-point adjustment, either using a
calibration gas or using a reference instrument that is connected to the
MI70. See section Calibration and Adjustment with MI70 Indicator on
page 79.