Vaisala GMP231 - Manual (Page 11)

Chapter 1 _________________________________________________________ General Information
VAISALA _________________________________________________________________________ 9
Safety
The GMP231 probe delivered to you has been tested for safety and
approved as shipped from the factory. Note the following precautions:
WARNING When returning a product for calibration or repair, make sure it has not
been exposed to dangerous contamination, and is safe to handle without
special precautions.
CAUTION Do not modify the unit. Improper modification can damage the product
or lead to malfunction.
CAUTION Do not open the probe housing. There are no user serviceable parts
inside.
ESD Protection
Electrostatic Discharge (ESD) can cause immediate or latent damage to
electronic circuits. Vaisala products are adequately protected against
ESD for their intended use. It is possible to damage the product,
however, by delivering an electrostatic discharge when touching an
exposed contact on the product.
To make sure you are not delivering high static voltages yourself, avoid
touching the pins on the M12 connector.
Recycling
Recycle all applicable material.
Dispose of the unit according to statutory regulations. Do not dispose of
with regular household refuse.