Vaisala GMP231 - Manual (Page 42)

User's Guide _______________________________________________________________________
40 ___________________________________________________________________ M211501EN-C
Set Serial Line Response Time
With the SDELAY command you can set delay (response time) of the
serial line, or view the currently set delay value.
SDELAY [delay]
where
delay = Serial line delay, range 0 … 255 (milliseconds).
Example (set delay to 50 milliseconds):
sdelay 50
Serial delay : 50
Set Serial Line Echo
Use the ECHO command to enable or disable the echoing of characters
received by the probe.
ECHO [on/off]
Example:
echo
Echo : OFF