Apple Workgroup Server 8550 - Manual (Page 54)

Installing an additional hard disk in the internal disk drive bracket
You can add a secondary internal hard disk in the top bay of the server’s
internal disk drive bracket (shown in the external view of the server in the
section “Your Server at a Glance” in Chapter 1).
Follow these steps to install an additional internal hard disk.
1 Open the server by following the instructions in the section “Opening the Server Safely”
earlier in this chapter.
Remember to wear a grounded wriststrap while installing an internal hard disk.
2 Touch the metal part of the power supply case inside the server to discharge
static electricity.
Always do this before you touch any parts or install components inside
the server.
Power supply
Connecting hard disks and other SCSI devices 45