Apple Workgroup Server 8550 - Manual (Page 33)

Connecting to a LocalTalk network
To connect your server to a LocalTalk network, you will need LocalTalk
cables and a LocalTalk adapter. The Apple LocalTalk Locking Connector Kit
DIN-8, available from your Apple-authorized dealer, contains the
components you need to connect the server to an existing LocalTalk network
by means of the printer port.
To connect the server to a LocalTalk network:
1 Make sure that the server is turned off.
2 Attach the LocalTalk adapter to the printer port.
3 Plug one end of a LocalTalk cable into the LocalTalk adapter.
4 Plug the other end of the cable into the last LocalTalk adapter on the network.
Printer port
LocalTalk adapter
LocalTalk cable
Printer port icon
Printer port
24 Chapter 2 / Connecting to the Network