Apple Workgroup Server 8550 - Manual (Page 20)

Connecting the monitor cable
After you plug in the monitor’s power cord, connect the monitor cable to the
server’s monitor port.
To connect the monitor cable:
1 Attach the monitor cable to the monitor.
On some monitors, the cable is already attached.
2 Attach the monitor cable to the server’s monitor port.
The monitor port is marked with the icon ™. To connect the cable,
firmly push it into the connector and then use the thumbscrews to secure
the connection.
If you have an AudioVision monitor, see the information that came with the
monitor to use its special features.
Monitor cable ™ Monitor port
Connecting a monitor 11