GReddy Profec - Manual (Page 9)

Product Features
Contents
- Utilizes OLED (organic light-emitting diode) display for improved viewing angles &
brightness.
- Monitor boost pressure in real time. 3 selectable display patterns for boost pressure
- By separating the Control unit from the Power unit, the Profec greatly improves the
installation process.
- Additional flush mounting options due to the thin 11mm thick design.
- 180-degree rotatable display screen for flexibility in the layout of controls and
installation options.
- High-performance pressure sensor supports up to 300kPa (43.5psi).
- High capacity compact solenoid valve and the new CPU increase the speed of the
controller.
- Configurable boost modes: LO, HI, and SCRAMBLE.
- Adjustable SET%, START BOOST and GAIN% settings ensure stable boost curves.
- Warning function when exceeding the preset boost value.
- Limiter control function: to decrease boost when above the alarm setting.
- Last boost function: to confirm the highest boost value set in the most recent boost
session.
- Peak hold function: capable of recalling the maximum boost pressure value
recorded.
- Data lock function: to protect the programmed settings and avoid accidental
changes.