GReddy AIR INTAKE SYSTEMS: Infiniti G35 / Nissan 350Z DE 2003-06 User Manual
Installation, Parts identification, Tools required
Installation
1
Complete Stock intake. Please disconnect battery
terminals before installation.
2
Loosen the 4 bolts using 10mm socket or wrench
holding in engine cover and remove.
3
With T20 Torx bit, loosen the 2 bolts holding in MAF
sensor. Carefully remove sensor out of stock intake.
7
With provided M4 screws, install MAF sensor to new
intake tube.
8
Install coupler with clamps to throttle body. Tighten
clamp on throttle body side only.
9
With 10mm socket and ratchet, remove the two 10mm
bolts from the OEM intake tube and airbox. Loosen
the top of OEM intake tube w/ 5/16” nut driver.
4
Remove crank case line from stock intake tube.
Disconnect MAF sensor harness.
5
Carefully remove stock air box assembly out of vehicle.
(ram scoop optional.)
6
06-80497 Pg1
Parts Identification:
1
Air filter (
™ 61-90128)
1
Intake tube, 05-T3001P1 (Polished)
1
Coupling, straight 3” x 2”L 05-00664
2
Clamp #048
1
Flat washer M6
1
Hex screw M6
2
Screw M4 x .7 x 8
Tools Required:
10mm socket or wrench
Ratchet w/ extension
Phillips screw driver
Flat head screw driver
5/16” nut driver
Pliers
Note: Read instructions before
installation and have tools ready.
Kit P/N:
12529004 (Polished)
Make:
Infiniti
Model:
Year:
Engine:
G35 ’03.5-’06 Coupe
(No circular MAS)
V6-3.5L
G35
‘03.5-’07 Sedan
(No circular MAS)
V6-3.5L
Make:
Nissan
Model:
Year:
Engine:
350Z ’03-’06 V6-3.5L