GReddy Profec - Manual (Page 5)

Contents
Please read carefully Safety advice
Warning
Installation and tuning of this product should only be performed by a trained
specialist who is very familiar with the automobile s mechanical, electrical
and fuel management systems. If installed by an untrained person, it may
cause damage to the unit as well as the vehicle.
Do not work on a vehicle that has recently been shut off. The exhaust system
may be extremely hot and could cause burn injury.
Professional installation is recommended. There is a risk of injury if performed
by an untrained person.
Be sure to inspect and examine all mounting surfaces and locations.
Improperly mounted controllers can fall while driving the vehicle. This could
cause serious injury or damage.
Do not attempt to operate the product while driving. Doing so may cause an
accident.
Before moving the vehicle, make sure that your work area is clear of tools and
is safe to drive through. Make sure that there are no tools or objects in the car
that will keep you from operating the vehicle in a safe manner.
Make sure that the installation of fuel sensors is done somewhere that is well
ventilated. Fuel is flammable and may cause serious injury if not handled
properly.
When using soldering irons and nippers, please read their operating manuals
prior to use. Improper use of this equipment may lead to injury or illness.