GReddy INFO TOUCH User Manual

GReddy For the car

GReddy INFO TOUCH Basic Operation Guide:

Installing the unit.

OBD (TYPE)
1. Connect to OBD connecter.
2. Connect the Red wire with the Male bullet plug on the white connect to the

Black/White female bullet connector on the cigarette lighter cable.

3. Connect the cigarette lighter cable to the vehicles cigarette lighter socket for

ignition power.

NON OBD (Old NISSAN).
1. Connect to NISSAN diagnosis connector.
2. Connect the Red wires together on the White connector.

(Do not use cigarette lighter cable)

3. Additional special wiring may be required. (optional parts)

Basics of the Info Touch Screen.

1. Connect unit and power up Info Touch
2. Everything is controlled by touching a point on the screen with your finger.
3. From the Monitoring Screen, Items (sensor parameter) are displayed in white
4. From the Monitoring Screen, if you touch anywhere on the screen besides the Item,

it will go to the Main Menu [PATTERN] [ITEM] [SETTING] and the Back button

5. The  BACK button (looping left arrow) will return to the last screen displayed.
6. The  ENTER button (down to the left arrow) will return to the Monitoring

Screen

7. Touch Scroll Bar and the  (up arrow) &  (down arrow) to scroll down the

screen.

8. Touch the different buttons, digital displays or symbols for various controls.

Changing from Japanese to English Language.

1. From the Monitoring Screen, touch the screen. (anywhere except at the item name)
2. The Main MENU with [PATTERN] [ITEM] [SETTING] will appear.
3. Select [SETTING].
4. Select [言語]. (the button at the very top of the screen)
5. Select [ENGLISH].
6. Touch the  Enter button.

Changing Display Direction.