GReddy Profec - Manual (Page 36)

■Programming the Boost Limiter■
LIMITER
SET
SET
Boost
Time
WARNING value
0×100kPa
LIMITER is running.
■While LIMITER is activated■
LIMITER in operation
LIMITER
A safety function to lower the boost, once the WARNING boost value is exceeded.
The percentage boost lowered can be programmed.
If the LIMITER is programmed to 0%, the unit will not reduce boost.
Once the LIMITER is activated at the WARNING boost value, it
will continue to reduce boost by the programmed
percentage until the boost pressure falls to negative pressure
(vacuum).
(1) In a BOOST mode set-up screen, highlight LIMITER and
press the SET DIAL to confirm.
(2) Rotate the SET DIAL to change a LIMITER % to reduce
the boost.
(3) To program the LIMITER %, press the SET DIAL to
confirm and return to the BOOST mode set-up screen.
Mode s set up screen
Mode s set up screen
Boost settings
Once the LIMITER is activated and the boost controller will
attempt to reduce boost by the programmed percentage.
While being activated, the display screen will show a
LIMITER warning alert.