GReddy Profec - Manual (Page 25)

UNIT
Configure the display boost units in either kPA or PSI.
SET UP
UNIT
■Programming■
ALARM
2 100kPa=1.01972kg/cm =14.5PSI
Configure the alarm sounds of warning and limiter.
SET UP
ALARM
■Programming■
SET
SET
Configurations
(1) In the main SETUP screen, rotate the SET DIAL to
highlight UNIT. Then press the SET DIAL to confirm.
(2) Rotate the SET DIAL to highlight and select kPa or PSI.
Press the SET DIAL to confirm.
* To cancel and return to the previous setting and the
main SET UP screen, press MODE.
(1) In the main SETUP screen, rotate the SET DIAL to
highlight ALARM. Then press the SET DIAL to confirm.
(2) Rotate the SET DIAL to highlight and select an Alarm
pattern. Press the SET DIAL to confirm.
* To cancel and return to the previous setting and the
main SET UP screen, press MODE.
Alarm off : No Sound
Alarm 1: Beep Beep, Beep Beep
Alarm 2: Beep, Beep, Beep, Beep
Alarm 3: Beep---------------------