GReddy Profec - Manual (Page 38)

SWITCH MODE
■About the SCRAMBLE feature display■
Remaining time
■Programming the SCRAMBLE boost feature activation■
SWITCH MODE
SET
TIME (When PRESET is selected)
Real-time display
SCRAMBLE mode
(PRESET)
SET
Boost settings
Mode s set up screen
Configure the transition to SCRAMBLE feature.
(1) In the SCRAMBLE feature set-up screen, highlight
SW.MODE and press the SET DIAL to confirm.
(2) Use the SET DIAL to choose & confirm between MANUAL
or PRESET. * To cancel and return to the previous setting
and the SCRAMBLE mode set-up screen, press MODE.
PRESET: SCRAMBLE feature is activated for a timed duration
once the SET DIAL is pressed, while in a BOOST LO / HI
Real-time (boost gauge) mode.
** Once PRESET is selected for the SWITCH MODE, you can
program how long of a TIME the SCRAMBLE feature will be
activated for. The setting ranges from 1-99sec.
** The TIME SET-UP screen will appear when PRESET is
confirmed.
MANUAL: SCRAMBLE feature is activated as long as the SET
DIAL is pushed and held down, while in a BOOST LO / HI
Real-time (boost gauge) mode.
With the SCRAMBLE feature SELECT set to ON, you can
activate the SCRAMBLE feature from the BOOST LO or
BOOST HI mode s Real-time (boost gauge) display screens,
by pressing the SET DIAL. When the SWITCH MODE is set
to PRESET, a countdown will display in the upper right
corner of the screen, when the SCRAMBLE feature is
activated. At anytime during it s countdown, you can
press the SET DIAL again to end the timed SCRAMBLE
feature early and the unit will then return to the previous
BOOST LO or BOOST HI mode.