GReddy AIR INTAKE SYSTEMS: Lexus IS250 / IS350 2006-10 User Manual
Installation, Parts identification, Tools required
Installation
1
Complete Stock intake. Please disconnect battery
terminals before installation.
2
Remove engine cover and front/passenger plastic
covers.
3
With 10mm socket or wrench loosen the 2 bolts hold-
ing in bottom half of air box and remove.
7
Remove MAF sensor using phillips screwdriver.
8
With provided M4 screws, install MAF sensor to new
intake tube.
9
With 10mm socket and ratchet, loosen the two
clamps using a 10mm socket or wrench from the
OEM intake tube and airbox. Disconnect MAF sensor
harness.
4
Remove crank case line from stock intake tube.
5
Carefully remove stock air box assembly out of vehicle.
6
06-80507 Pg1
Parts Identification:
1
Air filter (
™ 61-90133)
1
Intake tube, 05-T2004P1
1
Housing, wrinkle black 05-T2004B2
1
Adaptor, 3-angle filter
1
Coupling, straight 05-00664
1
Coupling, reducer 05-00612
2
Clamp #048
1
Clamp #072
1
Clamp #060
1
Trim, rubber edge 1/16” @ 12”L
1
Trim, rubber edge 1/16” @ 24”L
3
Screws, button head
2
Flat washer M6
2
Hex screw M6
2
Screw M4 x .7 x 8
Tools Required:
10mm socket or wrench
Ratchet w/ extension
Phillips screw driver
Flat head screw driver
5/16” nut driver
Pliers
4mm allen key
Note: Read instructions before
installation and have tools ready.
Kit P/N:
12519002
Make:
Lexus
Model:
Year:
Engine:
IS250 06-12
V6-2.5L
IS350 06-12 V6-3.5L