DAVIS WeatherLink for Windows 4.0 - Manual (Page 39)

U S I N G T H E S O F T W A R E
Setup Menu
30
Auto Clear
You may set up the software to automatically clear selected high/low registers
and rainfall totals at a set time each day (the software must be running). For more
information on how the Auto Clear feature works, see “Automatic Clear” on
page 92.
Note: This command will clear highs and lows on the bulletin if it is running at the time the Auto
Clear occurs.
1. Choose Set Auto Clear from the Setup menu.
The Auto Clear dialog box appears.
A UTO C LEAR
2. Indicate which high/low registers and/or rainfall totals you wish cleared automatically
by selecting the appropriate check box.
You may quickly select all high/low registers and rainfall totals by choosing
Check All. You may quickly de-select all high/low registers and rainfall totals
by choosing Check None.
3. Enter the time at which you want the station to clear the selected highs and lows each
day into the Time text box.
4. When finished setting up Auto Clear, choose OK.
The software saves the Auto Clear settings. The selected high/low registers
and rainfall totals will be cleared at the specified time each day.