DAVIS WeatherLink for Windows 4.0 - Manual (Page 31)

U S I N G T H E S O F T W A R E
Setup Menu
22
Select Units
You may select the units of measure in which data is displayed within the soft-
ware. All program windows (bulletin, summary, plots, database, etc.) display data
in the selected units of measure. Choosing units of measure in the software does
not affect the units of measure in which data is displayed on the console.
1. Choose Select Units from the Setup menu or press Ctrl-U.
The Choose Units dialog box appears.
C HOOSE U NITS
2. Select the desired units of measure:
▲ Temperature: Fahrenheit (°F) or Celsius (°C)
Wind chill, dew point, degree-days, and temperature-humidity index are
all displayed in the same unit of measure as temperature.
▲ Barometer: Inches of Hg (in), Millimeters of Hg (mm), Millibars (mb), or
Hectopascals (hPa)
▲ Wind Speed: Miles per Hour (mph), Knots (knot), Kilometers per Hour (km/hr), or
Meters per Second (m/s)
▲ Rain: Inches (in) or Millimeters (mm)
3. After selecting units of measure, choose OK.
The software saves your choices. All information will be displayed in the units
of measure you selected.