DAVIS WeatherLink for Windows 4.0 - Manual (Page 36)

U S I N G T H E S O F T W A R E
Setup Menu
27
1. Choose Set Hum Cal from the Setup menu.
The Set Hum Cal dialog box appears. The raw reading shown in this dialog
box indicates the unadjusted reading coming from the sensor. The adjusted
reading indicates what the software displays, adjusted for any previously
entered calibration number.
S ET H UMIDITY C AL
2. Enter the desired adjusted reading and choose OK.
The software automatically calculates the necessary calibration number to
convert the raw reading into the adjusted reading and saves that calibration
number to the console and the station’s configuration file.
Set Total Rain
You may want to enter a total rainfall amount to reflect any rainfall which
occurred before you obtained your station or before you started using the soft-
ware. In order for the software’s rainfall totals to remain consistent with the sta-
tion’s totals, you must enter total rainfall from the software. Once you set total rain,
the console and software will continue to accumulate rainfall normally.
1. Choose Set Total Rain from the Setup menu.
The Set Total Rain dialog box appears.
S ET T OTAL R AIN
2. Enter the total rainfall amount and choose OK.
The software saves the total rainfall amount to the console and to the station’s
configuration file.