Display of destructivepunch status, Track record status display – Avid Technology Pro Tools HD 7.2 User Manual
Page 39

Chapter 3: Recording Features and Enhancements
33
Display of DestructivePunch Status
Transport Record Enable Button
The Transport Record Enable button indicates
DestructivePunch mode and Record status as
follows:
When DestructivePunch mode is enabled:
◆
The letters “dp” appears in the Transport
Record Enable button.
◆
If at least one track is DestructivePunch-en-
abled, the Transport Record button lights solid
blue.
When DestructivePunch mode is enabled and the
transport is armed for recording:
◆
If no tracks are DestructivePunch-enabled, the
Transport Record Enable button flashes gray and
red.
◆
If at least one track is DestructivePunch-en-
abled, the Transport Record Enable button
flashes blue and red.
◆
If at least one DestructivePunch-enabled track
is also record enabled, the Transport Record En-
able button flashes blue and red, and the record
LED lights.
◆
Whenever at least one audio track is record-
ing, the Transport Record Enable button lights
solid red.
Track Record Status Display
When Pro Tools is in DestructivePunch mode,
each track’s Record Enable button indicates its
DestructivePunch and record enable status as
follows:
• When a track is both DestructivePunch-en-
abled and record-enabled, its Record Enable
button flashes blue and red.
• When a track is DestructivePunch-enabled
but not record-enabled, its Record Enable but-
ton lights solid blue.
• When a track is record-enabled only, its
Record Enable button flashes red.
• While a track is recording (in any mode), its
Record Enable button lights solid red.
Transport Record Enable button with DestructivePunch
mode enabled
DestructivePunch status in the Transport window
Record LED
Input Status
LED
DestructivePunch Enabled
DestructivePunch status indication in an audio track in
the Mix window
Track Record status in the Edit window
Record Enable button
Red (not flashing) indicates recording
(all modes)