Continuous zooming in the edit window, Scrubbing in the edit window, Selecting with the scrubber – Avid Technology Pro Tools HD 7.2 User Manual
Page 118: Automation mode indication, D-control and d-command automation indicators

What’s New in Pro Tools HD 7.2
112
To drop the cursor in the Edit window while in
Continuous Scroll Mode:
■
Hold Control+Start+Alt (Windows) or Com-
mand+Control+Option (Mac) and press the
Mark In/Out switch.
Continuous Zooming in the Edit
Window
You can use the Scrub/Shuttle Wheel to zoom
continuously in the Edit window.
To zoom continuously (horizontal zoom):
■
Hold Control (Windows) or Command (Mac)
while turning the Scrub/Shuttle Wheel.
To zoom continuously (vertical zoom):
■
Hold Control+Alt (Windows) or Com-
mand+Option (Mac) while turning the
Scrub/Shuttle Wheel.
Scrubbing in the Edit Window
You can use the Scrub/Shuttle Wheel to scrub
without entering Scrub mode.
To scrub during playback:
1
Click in a track you want to scrub.
2
Hold Start (Windows) or Control (Mac) while
turning the Scrub/Shuttle Wheel.
To latch the Scrub/Shuttle Wheel in scrub:
■
Press Start (Windows) or Control (Mac) mo-
mentarily (less than 1/2 second) while turning
the Scrub/Shuttle Wheel.
To scrub with fine resolution:
■
Hold Start+Control (Windows) or Con-
trol+Command (Mac) while turning the
Scrub/Shuttle Wheel.
Selecting with the Scrubber
You can use the Scrub/Shuttle Wheel to select
track material with the Scrubber.
To scrub while adding to the front of a selection:
■
Hold Start+Shift (Windows) or Control + Shift
(Mac) while scrubbing the front of the selection.
To scrub while adding to the end of a selection:
■
Hold Start+Shift+Alt (Windows) or Con-
trol+Shift+Option (Mac) while scrubbing the
end of the selection.
To scrub with fine resolution while adding to the
front of a selection:
■
Hold Start+Shift+Control (Windows) or Con-
trol+Shift+Command (Mac) while scrubbing the
front of the selection.
To scrub with fine resolution while adding to the
end of a selection:
■
Hold Start+Shift+Alt+Control (Windows) or
Control+Shift+Option+Command (Mac) while
scrubbing the end of the selection.
Automation Mode Indication
Control Surfaces now indicate automation
mode in the following ways:
D-Control and D-Command Automation
Indicators
Track Automation Mode Indicators
◆
When a track is enabled for automation but
no controls are writing automation, the Auto-
mation mode indicator on its channel lights
solid.