Punching recalled automation values, Automatching individual controls, Focusing plug-ins in custom fader plug-in mode – Avid Technology Pro Tools HD 7.2 User Manual
Page 123

Chapter 10: Control Surface Features
117
2
Press the Soft Key that corresponds to the
snapshot preset you want to recall. The switch
flashes to indicate that the preset is loaded into
the Capture buffer, and available to punch.
Punching Recalled Automation Values
To punch a recalled snapshot:
1
Move to a location where you want to apply
the captured automation states. You can do this
during playback or while the transport is
stopped.
2
Press the Punch Capture switch in the Soft
Keys section to apply the captured automation
states. The captured states are applied to all au-
tomation types that are currently enabled in the
Automation window.
AutoMatching Individual Controls
On ICON worksurfaces, you can invoke
AutoMatch on individual controls or control
types on single channels.
To AutoMatch all controls of a type on a channel:
■
Hold Control (Windows) or Command (Mac)
and press any of the following in the Channel
Strip Mode controls for the track whose controls
you want to AutoMatch:
• Inserts
• Sends
• Pan
• Dyn (D-Control only)
• EQ (D-Control only)
To AutoMatch the volume fader on a channel:
■
Hold Control (Windows) or Command (Mac)
and press the Auto switch in the Channel Strip
Function controls for the channel.
To AutoMatch a pan control or the controls for an
individual insert or send on a channel:
1
Press the switch in the Channel Strip Mode
controls to display the Pan controls or the top
level of Inserts or Sends for the channel.
2
Hold Control (Windows) or Command (Mac)
and press the Rotary Encoder Select switch for
the control you want to AutoMatch:
• For Sends, the Send level, pan, and mute
will AutoMatch.
• For Inserts, all automated controls will Au-
toMatch.
• For Pan, all pan sliders on the channel will
AutoMatch.
To AutoMatch all controls for a plug-in displayed in
the Dynamics or EQ section:
■
Hold Control (Windows) or Command (Mac)
and press the Auto switch in the Dyn or EQ sec-
tion of the console.
Focusing Plug-ins in Custom Fader
Plug-in Mode
The key command for directly focusing a plug-
in Custom Faders on D-Control and D-Com-
mand has changed.
To focus a plug-in in Custom Fader mode directly
from top-level Inserts view:
■
Hold Control+Alt (Windows) or Com-
mand+Option (Mac) and press the encoder Se-
lect switch for the plug-in you want to focus.