JKS 2943 - Manual

JKS2943 JKS Adjustable Sway Bar Links Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable End Links
Part Number: JKS2943
Applications: Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing a set of new
Adjustable End Links from JKS Manufacturing. We
are committed to providing you with the best products
available and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.\
Important
NOT COMPATIBLE WITH aftermarket swaybars.
Install product with Original Equipment swaybar
only.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Tape Measure
 Angle Measuring Tool
 3/4” Open-End Wrench
 14mm & 15mm Open End Wrenches
 Medium Strength Threadlocker
 Metal Cutting Tool (such as die grinder with cutting
wheel or appropriate saw for cutting connecting rod)
 Metal Grinding Tool * (such as die grinder with
metal cutting wheel)
 17/32” Drill Bit *
 Satin Black Spray Paint *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036