JKS 2034 User Manual
Installation instructions, Welcome, Tools required
JKS2030 - JKS2034
JKS Quicker Disconect Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Quicker Disconnects™
Part Number: JKS2030 - JKS2034
Applications: Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing a set of new
Quicker Disconnects™ from JKS Manufacturing. We
are committed to providing you with the best products
available and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Medium Strength Threadlocker
#1 Philips Screwdriver or Small Punch
Angle Measuring Tool
15/16” Open-End Wrench
18mm & 19mm Open-End Wrenches *
Grease Gun with Zerk Fitting Coupler
Wheel Bearing Grease
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
A
1/2" Nylock Nut
B
Offset Polyurethane Spacer
C
1/2" Upper Tapered Mounting Post (Long)
D
Spherical Bushing
E
Press-In Grease Zerk
F
Grease Zerk Cap
G
Upper Male Threaded End Assembly
H
5/8” Jam Nut
I
Lower Female Threaded End Assembly
J
Click Pin
K
1/2” Lower Tapered Mounting Post (Drv Side - Short)
L
1/2” Nylock Nut
M
1/2” Lower Flat Mounting Post (Pass Side)
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036