Figure 2-14. wnd/el adjustment screen -23 – EOTech LWTS Light Weapon Thermal Sight User Manual
Page 41

2-23
2.20 RETICLE (RET) (Continued)
ADJUST
NOTE
If NONE or 5 MIL are selected as the weapon
reticle, the message NOT ADJUSTABLE will be
displayed when activating the ADJUST sub-menu
item.
Activating the ADJUST sub-menu item calls up the WND/EL
Adjustment Screen shown in Figure 2-14.
Figure 2-14. WND/EL Adjustment Screen.
The WND/EL Adjustment Screen allows for moving the
position of the reticle in the eyepiece display. Adjustments in
windage are made by pressing the + or - sides of the
LVL/WND
rocker switch. Adjustments in elevation are made
by pressing the + or - sides of the GAIN/EL
rocker switch.
In WFOV, each press of the rocker switch equates to a
change in reticle position of 2 units, as shown on the display.
In NFOV, each press of the rocker switch equates to a
change in reticle position of 1 unit, as shown on the display.