EOTech LWTS Light Weapon Thermal Sight - Manual (Page 21)

2-3
2.2 BATTERY HANDLING (Continued)
Figure 2-1. Battery Installation.
4. Reseat the battery pack in the battery compartment.
5. Tighten the thumbscrew by turning clockwise until snug.
Battery Capacity
A battery symbol and bars are prominently visible in the
eyepiece display and provide a graphical representation of
remaining battery life. As battery life decreases, the number
of bars will also decrease. Each time the battery level drops,
the battery symbol will flash five times to alert the operator.
A low battery message will appear in the eyepiece display
when 5 - 40 minutes of continuous operation remain. If the
batteries are not replaced promptly when the “LOW BATT”
message appears, the display quality will deteriorate rapidly.
Just prior to complete battery drain, the LWTS will
automatically power down.