EOTech LWTS Light Weapon Thermal Sight - Manual (Page 25)

2-7
2.4 MOUNTING IN-LINE WITH OTHER OPTICS
(Continued)
Figure 2-3. LWTS with Shroud.
Using an Interface Hood
Interface hoods require the use of an eyepiece adapter ring
to provide a threaded connector that attaches directly to the
LWTS eyepiece assembly. Interface hoods (and the
eyepiece adapter) are used as follows:
1. Mount the day optic to the weapon rail per manufacturer’s
operating instructions.
2. Pull the narrow, circular end of the interface hood over
the eyepiece adapter ring so that the lip of the interface
hood is seated in the molded groove (see Figure 2-4).