EOTech LWTS Light Weapon Thermal Sight - Manual (Page 26)

2-8
2.4 MOUNTING IN-LINE WITH OTHER OPTICS
(Continued)
Figure 2-4. Attaching Interface Hood to Eyepiece
Adapter Ring.
3. Screw the eyepiece adapter ring onto the LWTS eyepiece
assembly by turning clockwise until tight.
4. Mount the LWTS to the weapon rail by performing the
steps contained in section 2.3. Ensure the interface hood
covers the objective lens of the day optic as shown in
Figure 2-5.
Figure 2-5. LWTS with Interface Hood.
MOLDED
GROOVE