EOTech Target Pointer Illuminator Aiming Light - Manual (Page 46)

2-22
a screwdriver or similar tool in the slot of the
thumbscrew to fully secure the AN/PEQ-2A to the
bracket adapter.
f. Position the AN/PEQ-2A with Bracket Adapter onto
the M60 Mounting Bracket mounting groove. Align
the front edge of the Bracket Adapter and front edge
of the groove. Tighten the lever screw assembly.
g. Install the Remote Cable Switch in a convenient
location (see paragraph 2.5.3).
Figure 2-12 M60 Bracket Installation