EOTech Target Pointer Illuminator Aiming Light - Manual (Page 42)

2-18
c. Mount the AN/PEQ-2A to the Rail Grabber Bracket
as shown in Figure 2-10. Turn the thumbscrew
clockwise to tighten. Use a screwdriver or similar
tool in the slot of the thumbscrew to fully secure the
AN/PEQ-2A to the Rail Grabber Bracket.
d. Install the Remote Cable Switch in a convenient
location (see paragraph 2.5.3).
Figure 2-10 M249 SAW with Forward Rails Using Insight
Rail Grabber Bracket